Description
ไฟทางออก กันระเบิด 10w
Explosion proof EXIT sign 10w
Technical data
Type of Protection: Ex de IIA T6
Conforming to : Standards IEC 60079 – 0 to 1 or UL 60079-1
Marking for test : Ex II2G
Degree of Protection : IP 66 acc.To IEC 60529
Ambient Temp. (Ta) : -5 C to+ 50 C
Rated Voltage : 220 – 240 V.AC. 50/60Hz. Output 12V.DC.
Type : EXIT
Lamp : 1 x 10w. For Flu. , 2 x 9w. For Compact Flu.
Protection class for UL. :
Class I, Divition1 or 2 Group.C,D
Class II, Divition1 or 2 Groups.E,F,G
Class III
Protection class for IEC : Zone1 and Zone 2
Applications:
The signs are used in hazardous areas to mark the direction of exits.
Provide distinctly and highly visible exit marking.
Indoor or outdoor use.
Features:
– Factory sealed, no extermal seals required.
– Inner lighting fixture is 1 x 10 W. explosionproof fluorescent with ballast and starter type or 2 x 9 W. Lamp compact fluorescent.
– Body and Cover Copper-free aluminium
– Two side red,,white EXIT lettering on white or green acrylic.
– Seal glass in cover for EXIT lettering.
– MAIN – ON pilot light indicates as power is being supply to the system.
– Selecter switch 2 position for ON – OFF
– Standard hub size 3/4 inch NPT.
– Single side and Double side signs.
– Battery Charge ROCKET Sealed Acid/Calcium Battery.
– Maintenance free,joint ventured with YUASA,SONY or SUNNY under for ISO9001 and Certified and UL
Standard Materials:
– Body and fixtures – Copper-free aluminium
– Lens – Heat and impact resistant clear glass
– Sign face – White,green acrylic with red,white colour letters.
– Hinge , bolts – Stainless steel
Standard Finishes:
– Copper-free aluminium – Epoxy-polyester powder
– Stainless steel – Natural
– Acrylic plastic – Natural
Options :
For outdoor used on request.
For input supply 240 V.AC. 50 Hz.
Provided with emergency power pack,
add suffix – E to Cat.,No.
