Description
Flasher กันระเบิด แบบห้อย 1w
Obstacle lights explosion proof 1w
Technical data
Type of Protection: Ex d IIA T6
Conforming to : Standards IEC 60079-0 to 1 or UL 60079-1
Marking for test : Ex II2G
Degree of Protection : IP 66 / 67 acc.To IEC 60529
Ambient Temp. (Ta) : -20 C to+ 55 C
Rated Voltage : 12 – 24V.DC. 110 – 220 V.AC. 50Hz
Type : EOL , EFH
Lens : Acrylic plastic
Globe : Heat and impact resistant glass
Body and junction box : Copper-free aluminium
Guard and screws : Stainless steel
Protection class for UL. :
Class I, Divition1 or 2 Group.C,D
Class II, Divition1 or 2 Groups.E,F,G
Class III
Protection class for IEC : Zone1 and Zone 2
Applications:
The EOL1 low-intensity obstacle lights and EFH1 Flasher are suitable to use
in hazardous areas where the presence of flammable gases,
dusts and flyings or fibers.
for marking and lighting of tall structures, buildings or use on mobile
objects which intend to reduce hazards to aircraft.
for outdoor and corrosive environments.
Features:
– Copper-free aluminium body and cated with epoxy-polyester for high corrosion resistant.
– powder for high corrosion resistant.
– Heat and impact resistant glass globes.
– 100W. For only fixed light, 150W. And 1W. For halgen lamp. (see Note and Options)
– Burning lamp life is more than 2,500hrs. For 100W. Incandescent traffic signalling lamp, or more than 2,000hrs. For 150W. And 1,000hrs. halogen lamp.
– Through-feed 3/4 inch NPT standard conduit hub for pendant and bracket type.
– Factory sealed
Standard Finishes:
– Copper-Free aluminium – Expoxy-polyester powder
– Stainless steel – Natural
Note :
Adding suffix for lens colour to Cat.,No.
R – Red, O – Orange, C – Clear, B – Blue
Adding suffix – H to Cat.,No. for integral flasher circuit assembly into fixture body.
